Send E-mail
Send SMS
Sakshi Chem Sciences Private Limited
Sakshi Chem Sciences Private Limited
Sitabuldi, Nagpur, Maharashtra
GST No. 27AARCS2821H1Z4
Send E-mail
Send SMS
Our Products

Redispersible Polymer PowderYes! I am interested
Redispersible Polymer Powders from Addage Construction Chemicals are organic chemical compound powders obtained through the spray-drying of aqueous emulsions. together with polysaccharide ethers and alternative additives, Addage Polymer Powders and DRYCRYL™ dispersion powders help improve the properties and performance of cement- or gypsum-based dry-mix merchandise.

Redispersible powders mix the performance edges of liquid latex modifiers with the convenience, dependableness and handling/storage benefits of one-component dry-mix systems.

Advantages for end-use merchandise include:
CLC Foaming AgentYes! I am interested
We are leading manufacturer of protein, super protein and the synthetic based foaming agent for cellular lightweight concrete(CLC). Popularly and most commonly lightweight blocks are made up with the help of foaming agents also this chemical is very useful for almost all the concrete products. CLC foaming agent concentrated with active components of enzymatic which is used to develop CLC for the sector of construction. The process of making foam is followed by multiple hydrolyzes at different parameters.

Some basic details about the product: It is natural and hydrolyzation based, high stability foam, does not produce any kind of emission. If stored as per instructions were written on the label its self-life will be minimum of 2 years.
Shutter Release OilYes! I am interested

Releasing agents gives a clean surface for the shutter. Shutter release oil is a greasy material which can help and ensure a fair-faced product of concrete it also gives the surface of product a stain-free look. All platforms require the different variety of releasing agent. For the wooden framework, the releasing agent will defiantly be differed as compared to the requirement of plastic one. The main purpose of using oils or greasy agents on mould surfaces is to give the product a better shine and mainly because of releasing agent the products can leave the mould easily without changing the shape and look.

Additional information:

Curing CompoundYes! I am interested
Curing Compound is required on all the concrete and cement surface. With the help of curing surfaces gain strength and it stays away from cracking also. Curing compound plays a vital role in protecting fresh concrete layer from sunlight, dust and other harmful effects of temperature. It forms a membrane which locks the moisture in concrete inside the layer and gives high strength and durability. Curing compound is highly recommended for use on airports and highways. It is not suitable for in-house use. The application need particular time to dry once the place is dry it is ready for use, drying time is approximately two hours, differs from place to place depending on the amount of air humid, heat and temperature.

• Increases light reflectance
• Stops the pre-mature water loss from freshly laid concrete
• Reliable
Paver Block HardenerYes! I am interested

Addage Super Con

Fast hardening compound for Concrete


Addage Super con is a liquid which acts as a Setting hardener for Concrete.


1.      fast setting

2.      Early strength.

3.      Good finish.

4.      Early demoulding and increase production


1.      Saving on material, labour and moulding time.

2.      Addage Super con is liquid in form, hence easy to use.

3.      The plasticizing action of Addage Super con helps in complete hydration of cement there by achieving superior strength.

4.      Wastage due to breaking in pre-cast elements is reduced saving on production cost.

5.      Addage Super con can be used with all types of cements.


 Addage Super con is mixed in the gauging water in the required proportion before addition to the dry mix. It should be added at the time of cement and flyash slury. 


Required dosage of Addage Super con has to be arrived at site by practical trials. The dosage is        

dependent on temperature conditions, type of cement, type of acceleration required. We however   

recommend dosages of 1 to 2  percent by weight of cement.   


      Addage Super con is available in 60 Kg & 250 Kg Barrel.

High Strength AdmixtureYes! I am interested
Placing of concrete and improving its strength can be easily enhanced through using the High Strength Admixtures without changing the ratio of cement and water in the plain mixture. Main ingredients which are used in superplasticizers are completely based on the SMF (sulfonated melamine formaldehyde condensate) SNF (naphthalene formaldehyde condensate). The effect of superplasticizer does not depend on the amount of addition whereas concrete mixes with slump level with SNF or SMF based admixtures. It is responsible for dispersion of cement particles, the large one to the smaller particles; it gives a remarkable increase in the fluidity of cement when it gets mixed.
Liquid Polycarboxylate EtherYes! I am interested
We are leading manufacturer of Polycarboxylate Ether(PCE 811).

Liquid Polycarboxylate Ether
is a superplasticizer which has a property of reducing water very highly.

Foam GeneratorYes! I am interested
Foam Generator

Foam generator (foam making machine) which used to make foam for making foamed concrete / cellular lightweight concrete.



Welcome to

Sakshi Chem Sciences Private Limited

  • Nature of BusinessManufacturer
  • Total Number of Employees11 to 25 People
  • Year of Establishment1996
  • Legal Status of FirmLimited Company (Ltd./Pvt.Ltd.)
  • Annual TurnoverRs. 2 - 5 Crore
  • GST No.27AARCS2821H1Z4
Incorporated in the year 1996, we, "Sakshi Chem Sciences Private Limited", are one of the prominent manufacturers, exporters and suppliers of an unlimited compilation of Pre & Post Construction Chemicals. Our product compilation comprises of Industrial Oil, Tile Adhesive and Curing Compound that are processed in adherence to the predefined industry procedures at our end. To keep up with the flawlessness of the assortment, we procure supreme quality constituents from our dependable and trustworthy vendors. It is because of the quality and flawlessness offered that our chemicals are widely applauded in the construction industries. We are exporting globally.

We are backed by a completely equipped production unit that contains all the necessary amenities that are required for the hassle-free processing and storage of the proffered chemicals. In addition, we have recruited a team of experienced professionals, who strive hard to meet the various client requirements, within the promised time period. We have gained Shahapurji Palamji Construction Company, B.G.R Energy Pvt. Ltd., Abhijeet Infrastructure Pvt. Ltd. and Nagarjuna Construction Company as our precious customers, in a very short time period of our service.


Corporate Information

Sakshi Chem Sciences Private LimitedSakshi Chem Sciences Private Limited



Send SMS
Sakshi Chem Sciences Private Limited
Sandip Agrawal  (Managing Director & CEO)
2nd Floor, Vishal Furniture, Opposite Police Station
Sitabuldi, Nagpur - 440012 , Maharashtra , India
Share Us:
Send E-mail