Send E-mail
Call 0804605046374% Response Rate
Sakshi Chem Sciences Private Limited
Sakshi Chem Sciences Private Limited
Sitabuldi, Nagpur, Maharashtra
GST No. 27AARCS2821H1Z4
Send E-mail
Call 0804605046374% Response Rate
Our Products

Redispersible Polymer PowderYes! I am interested
Redispersible Polymer Powders from Addage Construction Chemicals are organic chemical compound powders obtained through the spray-drying of aqueous emulsions. together with polysaccharide ethers and alternative additives, Addage Polymer Powders and DRYCRYL™ dispersion powders help improve the properties and performance of cement- or gypsum-based dry-mix merchandise.

Redispersible powders mix the performance edges of liquid latex modifiers with the convenience, dependableness and handling/storage benefits of one-component dry-mix systems.

Advantages for end-use merchandise include:
Foaming AgentYes! I am interested
We are leading manufacturer of protein, super protein and a synthetic based foaming agent for cellular lightweight concrete(CLC). The foaming agent is such chemical which is highly used in the field of construction for making bricks which are simply made up with the proper amount of cement, fly ash and foaming agent finely mix with water in particular compressed air. What makes these bricks which are made with foaming agents different from other bricks due to some specific qualities such as it is very eco-friendly have very lightweight so due to this it is easy for transporting it also have the soundproof quality which makes it different from other bricks. This agent produces almost no fumes of toxic or any emission over the lifetime.

Curing CompoundYes! I am interested
Curing Compound is required on all the concrete and cement surface. With the help of curing surfaces gain strength and it stays away from cracking also. Curing compound plays a vital role in protecting fresh concrete layer from sunlight, dust and other harmful effects of temperature. It forms a membrane which locks the moisture in concrete inside the layer and gives high strength and durability. Curing compound is highly recommended for use on airports and highways. It is not suitable for in-house use. The application need particular time to dry once the place is dry it is ready for use, drying time is approximately two hours, differs from place to place depending on the amount of air humid, heat and temperature.

• Increases light reflectance
• Stops the pre-mature water loss from freshly laid concrete
• Reliable
Shuttering OilYes! I am interested
Oil that is mainly used in the process of greasing inner areas of moulds is commonly known with the term of Shuttering Oil. Such kind of oils is also used for construction work. It is necessary to use high quality of releasing agent while using for any manufacturing process because if you are using low-quality cheap oil it give stain surface to the manufactured product and it also leave oil mark as well. To pick best quality oil is very important for use in any kind of mould. Oil can differ from the product like steel moulds required the different type of releasing agent while rubber products require the different one. One should pick the releasing agent as per the product requirement.

High Strength AdmixtureYes! I am interested
Placing of concrete and improving its strength can be easily enhanced through using the High Strength Admixtures without changing the ratio of cement and water in the plain mixture. Main ingredients which are used in superplasticizers are completely based on the SMF (sulfonated melamine formaldehyde condensate) SNF (naphthalene formaldehyde condensate). The effect of superplasticizer does not depend on the amount of addition whereas concrete mixes with slump level with SNF or SMF based admixtures. It is responsible for dispersion of cement particles, the large one to the smaller particles; it gives a remarkable increase in the fluidity of cement when it gets mixed.
Hydroxypropyl MethylcelluloseYes! I am interested
We deal in Hydroxypropyl Methylcellulose. We are one of the best supplier of our area.
White Tile AdhesivesYes! I am interested
Modified white polymer or white tile adhesives are based on adhesive of flexible cement with the properties of non-slump or slip and non-shrink. A thin bed or a think one which is used for the fixing of tiles which have absorbent and non-absorbent properties for the external and internal areas of walls or floors to screeds, brick, concrete, cement render or blocks. It is recommended to apply it internally for approving the cement sheet and gypsum building boards. It has a very high strength of bond 1.7MPa; deformation is high 2.5 mm and it has non-slump property.
Cement Wall PuttyYes! I am interested
The décor of your home wall can be marred easily through eyesore of flaking even if you run a very expensive coat of paint on your wall. Cement wall putty gives a high protection of walls from flaking and damaging it. The base of putty is cement based which binds the plaster base strongly if in such circumstances when the surface is damp and forms a very protective kind of base. It helps in filling the pores of the wall and gives a dry and very smooth surface for applying the layer of paint on it. As the putty ensures the protection of wall from flaking it gives a fine finish for years.

Welcome to

Sakshi Chem Sciences Private Limited

  • Nature of BusinessExporter and Manufacturer
  • Total Number of Employees11 to 25 People
  • Year of Establishment1996
  • Legal Status of FirmLimited Company (Ltd./Pvt.Ltd.)
  • Annual TurnoverRs. 2 - 5 Crore
  • Import Export Code (IEC)50140*****
  • GST No.27AARCS2821H1Z4
  • CIN No.U24230MH2012PTC229008

IndiaMART Certification

Trust Seal Verified

IndiaMART Verified Exporter
Incorporated in the year 1996, we, "Sakshi Chem Sciences Private Limited", are one of the prominent manufacturers, exporters and suppliers of an unlimited compilation of Pre & Post Construction Chemicals. Our product compilation comprises of Industrial Oil, Tile Adhesive and Curing Compound that are processed in adherence to the predefined industry procedures at our end. To keep up with the flawlessness of the assortment, we procure supreme quality constituents from our dependable and trustworthy vendors. It is because of the quality and flawlessness offered that our chemicals are widely applauded in the construction industries. We are exporting globally.

We are backed by a completely equipped production unit that contains all the necessary amenities that are required for the hassle-free processing and storage of the proffered chemicals. In addition, we have recruited a team of experienced professionals, who strive hard to meet the various client requirements, within the promised time period. We have gained Shahapurji Palamji Construction Company, B.G.R Energy Pvt. Ltd., Abhijeet Infrastructure Pvt. Ltd. and Nagarjuna Construction Company as our precious customers, in a very short time period of our service.


Corporate Information

Sakshi Chem Sciences Private LimitedSakshi Chem Sciences Private Limited



Send SMS
Sandip Agrawal  (Managing Director & CEO)
Sakshi Chem Sciences Private Limited
2nd Floor, Vishal Furniture, Opposite Police Station, Sitabuldi, Nagpur - 440012, Maharashtra, India
Share Us:
Send E-mail